Next message: Bryan Genez: "Re: [world-cruising] Re: glazed areas and hull strength ??"
I think I would use a wood dowel say 1/2" dia. with a rounded nose
(so you don't scar the mast) drill through the dowel with the
apropriate bit. Then I would slip the dowel over the bit leaving
only 1/8" exposed. Drill your first hole, it almost surely won't be
deep enough, extend the bit another 1/16" and try the next hole. Do
this until you find the right depth to just break through, then
redrill the first holes. Do this slow and deliberate and I should
think your risk of damaging any wiring would be low... Just a
thought. Jerry
------------------------ Yahoo! Groups Sponsor --------------------~-->
Help save the life of a child. Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/A1TolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/world-cruising/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
