Check out the bookstore at IRBS.com
| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

Re: [world-cruising] Re: Anchor snubber

From: Bryan Genez (no email)
Date: Tue Jan 04 2005 - 08:35:49 EST

  • Next message: peter oliver: "[world-cruising] Getting to Panama"

    Dwight Yachuk wrote:

    > I always use a bridle to keep the load on the boat and not the windlass and to
    > prevent chain slap during the night. The two lines extend about 4-6 feet from
    > the deck to a hook in the anchor chain taking up the load. I'm curious as to
    > how a bridle keeps the boat swinging around the anchorage? You're not
    > referring to wind shifts where the boat will swing around the anchor? Are you
    > refering to the action of the waves?

    FWIW, I use a bridle, too, with an all-chain rode. Most often, I set the
    bridle length at around 10 feet, but in light airs it's shorter. I leave my
    chart plotter on to monitor any drag. After an overnight in an anchorage,
    there's an arc of dots on my screen that show where the boat has swung. The
    arc probably describes at least a 30 degree angle. Of course, if there have
    been wind shifts, the arc is much greater.

    I haven't noticed that the bridle reduces boat swing.

    -- 
    Best,
    Bryan Genez (KB3HMZ)
    "Capella" Valiant 40 #158
    Annapolis, MD
     
    Yahoo! Groups Links
    <*> To visit your group on the web, go to:
        http://groups.yahoo.com/group/world-cruising/
    <*> To unsubscribe from this group, send an email to:
        
    <*> Your use of Yahoo! Groups is subject to:
        http://docs.yahoo.com/info/terms/
     
    

  • Next message: peter oliver: "[world-cruising] Getting to Panama"

    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |