Don Casey - Dragged Aboard Storm Tactics Handbook:
Modern Methods of Heaving-To for Survival in Extreme Conditions
by Lin Pardey and Larry Pardey


      

Other books by Lin and Larry Pardey
| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

Re: [world-cruising] Sewing machines

From: Brent Geery (no email)
Date: Fri Sep 10 2004 - 23:06:23 EDT

  • Next message: (no email): "Re: [world-cruising] cheapo accomodation in FL in early 2005 ??"

    On Fri, 10 Sep 2004 08:54:19 -0500, Courtney Thomas
    <> wrote:

    > Brent Geery wrote:
    >
    > > On Thu, 09 Sep 2004 01:07:32 -0000, "robertgainer"
    > > <> wrote:
    > >
    > >
    > >>I am a little confused about sewing machines. Is it practical to
    > >>think about sail repair with a machine that has on under arm
    > >>clearance of 8 inches. I can see getting a sail under an arm of 10
    > >>inches (tight) and I can see building a sail one panel at a time
    > >>with the 8-inch machine. But can you get the bunt of a sail under a
    > >>machine with only 8 inches under the arm and do repair. Also I don't
    > >>see the 12-volt machines anymore. Are they made, or am I looking in
    > >>the wrong place.
    > >>Thanks and all the best,
    > >>Robert Gainer
    > >
    > > For 12VCD operation, just replace the AC motor with a 12VDC
    > > equivalent. Really simple.
    >
    > Where'd you get such a motor, what'd it cost and how'd you attach it,
    > please ?
    >
    > Have you used it long ?
    >
    > Thank you,
    > Courtney

    Any CD motor should do, as long as you can attach to correct size
    pulley to its shaft. You might have to construct a bracket that
    attaches the motor to the sewing table, but that's a easy enough, or
    it may simply be a bolt-in replacement for the AC motor.

    Permanent magnet DC reversible motors are available all over, and you
    just need to find one that meets the same RPM and HP ratings as the AC
    motor, and that will mate with the drive belt pulley (or acquire a
    another pulley of the same size that will mate with the new DC motor).
    It's also nice if you can match the mounting hole configuration,
    avoiding the need to build a custom bracket, or any additional hole
    drilling.

    Price ranges from $5-$500. It all depends on what you find when you
    shop on the net. www.surpluscenter.com might be a good place to start
    shopping, but lots of other places as well-- here is an example of a
    motor that might work:
    http://www.surpluscenter.com/item.asp?UID=2004091021435927&item=10-2118&catname=electric

    -- 
    BRENT - The Usenet typo king. :)
    ------------------------ Yahoo! Groups Sponsor --------------------~--> 
    Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
    Now with Pop-Up Blocker. Get it for free!
    http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/A1TolB/TM
    --------------------------------------------------------------------~-> 
     
    Yahoo! Groups Links
    <*> To visit your group on the web, go to:
        http://groups.yahoo.com/group/world-cruising/
    <*> To unsubscribe from this group, send an email to:
        
    <*> Your use of Yahoo! Groups is subject to:
        http://docs.yahoo.com/info/terms/
     
    

  • Next message: (no email): "Re: [world-cruising] cheapo accomodation in FL in early 2005 ??"

    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |