|
|
Subject: Re: [worldcruising] Inner forestay
From: F. Otta (fotta@XXX.XXX)
Date: Thu Nov 02 2000 - 09:17:10 EST
Yes, yes, absolutely! The mooring cleats must be heavily backed up. I think
that here on Lake Ontario it is not a problem to have second rate mooring
gear but that of course is not the case where I plan to go. Thus, I plan to
use dual 10" S/S cleats (on my 26' contessa) with a large marine plywood
backing plate inside the forepeak. I'm not decided whether I will use an
inside attachment to further attach this point to the hull via a wire, since
it would have to go right through the water tank. Yeah, I know I could move
it but the deck is so solid anyway that with a large enough backing plate
this may not be necessary. Also, it is my intention to use an inner forstay
only for smaller sails or in emergencies. In any case, I may add an
internal bulkhead to achieve a similiar effect.
................................
Frank Otta
http://bikeroads.net
----- Original Message -----
From: "Jack Harkins" <jharkins@XXX.XXX>
To: <worldcruising@XXX.XXX>
Sent: Wednesday, November 01, 2000 11:46 PM
Subject: RE: [worldcruising] Inner forestay
> Articles I've read almost always suggest that the cleats/attachment device
should not only be backed up well but also should involve a connection from
the attachment's underside to either a bulkhead or the keel, etc. These
articles also raise the issue of running backstays to counteract the
pressure a baby-stay puts on the mast.
>
> In France, I've seen inner-stays attached to a hifield lever (sp?) setup.
>
> Jack Harkins
>
> -----Original Message-----
> From: F. Otta [SMTP:fotta@XXX.XXX]
> Sent: Wednesday, November 01, 2000 8:12 PM
> To: worldcruising@XXX.XXX
> Subject: Re: [worldcruising] Inner forestay
>
> mmmmmmmmmm
>
> The mooring cleats at the bow are not heavily reinforced - they have no
> backing plates and there is little room to install them due to the "fine"
> nature of the bow. Thus my thought of moving them back (actually replacing
> them with larger ones) and at the same time using this as a mounting point
> for a 2nd forestay.
>
> In any case, my concern is whether I need an actual forestay or will a
wire
> luff inside a heavy sail do the job without a forestay.
>
>
> ...............................
> Frank Otta
> http://bikeroads.net
>
>
>
> ----- Original Message -----
> From: <bmintz@XXX.XXX>
> To: <worldcruising@XXX.XXX>
> Sent: Wednesday, November 01, 2000 8:06 PM
> Subject: Re: [worldcruising] Inner forestay
>
>
> > Do you really need to go to a point amidships? You could tack it to the
> > rail, or a mooring cleat at the bow, thus not cluttering up your
foredeck.
> > These points are already heavily reinforced below. Does this help?
> >
> > Bill
> >
>
>
>
> =====================================
> To Unsubscribe, send an email to: worldcruising-unsubscribe@onelist.com
>
> Take this month's Worldcruising survey:
http://www.onelist.com/surveycenter/worldcruising
>
> WORLDCRUISING ARCHIVES:
> http://www.onelist.com/viewarchive.cgi?listname=worldcruising
> =====================================
>
>
>
> =====================================
> To Unsubscribe, send an email to: worldcruising-unsubscribe@onelist.com
>
> Take this month's Worldcruising survey:
http://www.onelist.com/surveycenter/worldcruising
>
> WORLDCRUISING ARCHIVES:
> http://www.onelist.com/viewarchive.cgi?listname=worldcruising
> =====================================
>
-------------------------- eGroups Sponsor -------------------------~-~>
Create your business web site your way now at Bigstep.com.
It's the fast, easy way to get online, to promote your business,
and to sell your products and services. Try Bigstep.com now.
http://click.egroups.com/1/9183/8/_/508787/_/973174420/
---------------------------------------------------------------------_->
=====================================
To Unsubscribe, send an email to: worldcruising-unsubscribe@onelist.com
Take this month's Worldcruising survey: http://www.onelist.com/surveycenter/worldcruising
WORLDCRUISING ARCHIVES:
http://www.onelist.com/viewarchive.cgi?listname=worldcruising
=====================================
|