Previous message: Georgs Kolesnikovs: "Poulsbo Trawler Fest reminder"
> Your reports of the installation and results of your GCF units left me a
> bit unsure as to exactly where you tapped into the American (Lehman).
> (I'm sure that it is my poor reading and not your detailed writing.) It
> sounded as if the feed line to the GCF was taken off the oil pressure
> sensor and I missed the return line connection. Since I am in the
> process of installing the units on my Lehman and Westerbeke, I would
> appreciate information on your connection points.
1. Your assumption about the feed line is correct.
2. My block allows the oil dipstick to be located on either side of the
engine. The unused side has a plug screwed into the opening. I removed
that plug and tapped it for the return hose from the Gulf Coast Filter.
