| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

T&T: Bilge pump switches

From: (no name) (no email)
Date: Sun Apr 27 2008 - 06:55:28 EDT

  • Next message: Don and Joann: "T&T: Hydraulic steering problem"

    Some of the new switches have a built in 8 second or so run after bilge is
    empty. If you mount one of these a few inches above the pump, the pump will run
     long enough to pump out all the water to the bottom, then when the hose full
    of water drains back into the bilge, the switch will be high enough not to
    turn on.
     
    Jake

    **************Need a new ride? Check out the largest site for U.S. used car
    listings at AOL Autos.
    (http://autos.aol.com/used?NCID=aolcmp00300000002851)
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe or modify your subscription options (get password, change email address, etc) go to: http://lists.samurai.com/mailman/options/trawlers-and-trawlering

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: Don and Joann: "T&T: Hydraulic steering problem"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |