Next message: Greg Bradley: "Re: T&T: Debugging an electrical problem"
> We have a Jabsco Electric 37045. When you hit the button to flush, the
> contents of the bowl swirl and swirl, but won't flush through. The holding
> tank has been pumped and we even tried a plunger, but to no avail.
> Any thoughts/suggestions?
Most likely causes:
As usual Peggy Hall is right on with her diagnoses. I have found that many times a plug will be at the joker valve which is where the discharge tube leaves the toilet. Three srcews hold the tube on. I would start there first and work back to the macerator. If it isn't at either of these two places then it is farther downline toward the holding tank and can be removed with a wet vac.
Richard Brunson
Yacht Products
Seattle
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
