| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

T&T: How to free stuck piston rings

From: Phil Keys (no email)
Date: Fri Feb 02 2007 - 11:16:55 EST

  • Next message: Faure, Marin: "T&T: Livingston dinghy (was Rigid vs Caribe dink)"

    Kathy K's Perkins 4-236 consumes 1 qt, of oil about every 30
    hours. When I bought the boat the engine had 400 hours since being
    rebuilt with a long block and now has 800 hours. This oil
    consumption seems constant. In every other aspect the engine works
    fine, little smoke at startup, no oil sheen on exhaust discharge.

    The only thing I can think of is that the engine was run too slow
    before I bought the boat and that the rings are gummed up. Has
    anybody had any experience freeing up stuck rings with an oil additive?

    Phil Keys
    Kathy K Willard 36, hull #34
    Port Hadlock, WA 98339
      
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe send email to
     with the word
    UNSUBSCRIBE and nothing else in the subject or body of the message.

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: Faure, Marin: "T&T: Livingston dinghy (was Rigid vs Caribe dink)"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |