Next message: Faure, Marin: "T&T: teak decks, was teak sealers"
The Vented Loop should go after the intake water pump, but before the bowl.
Cut the hose from the outlet of the intake water pump (not the waste water
discharge side!), run it up high to a vented loop, then back down to the
inlet of the bowl.
This way the vent will be able to open under a vacuum that is a result of a
failure mode (e.g., water siphoning in), vs. were it is currently installed
and the normal action of pumping in water presents a vacuum.
-al-
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
