| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

Re: T&T: Sealing Shorepower Receptacle on Boat-Threading it Down

From: Brent Hodges (no email)
Date: Wed Aug 02 2006 - 09:28:51 EDT

  • Next message: (no name): "Re: T&T: T&T Oil Analysis"

    From: "Benson,Joe" <>

    > I believe the newer Marinco cords and receptacles use a half twist lock.
    > Much easier to connect. You might find an inlet on Ebay and replace the
    > ring on the cordset.(endsnip)

    I've had these twist lock on a previous boat with 50 amp cord, and it is
    much easier than the threaded style. HOWEVER, you can't just change the
    rings. You would have to change the boat inlet to one that has the twist
    lock feature.

    Brent Hodges
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe send email to
     with the word
    UNSUBSCRIBE and nothing else in the subject or body of the message.

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: (no name): "Re: T&T: T&T Oil Analysis"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |