| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

T&T: Fw: T&T Power Question

From: Larry N. Brown (no email)
Date: Mon Jul 10 2006 - 10:31:40 EDT

  • Next message: Pascal Gademer: "Re: T&T: 30 amp service vs. 50 amp service"

    ----- Original Message -----
    From: Larry N. Brown
    To:
    Sent: Monday, July 10, 2006 9:30 AM
    Subject: Re: T&T Power Question

    While you are literally correct I, chose my example to illustrate the
    interaction of the 2 legs of the 240 circuit and the function of the neutral.
    Let's say it's not a boat, not a house but a large building with many, many
    circuits, each interacting so that a large number of of loads would be
    interacting simultaneously. If the system is well laid out you could remove
    the neutral and all would run well. Turn on the waffle iron alone and that leg
    might sag to 118 volts and the other would climb to 122 volts. In such a
    system, the function of the neutral is twofold: (1) return the small
    differential current in a balanced 240 system and (2) carry the entire load of
    1 leg when, for whatever reason, the system is not balanced.

    Regards.

    Larry

      ----- Original Message -----
      From:
      To:
      Sent: Monday, July 10, 2006 8:47 AM
      Subject: T&T Power Question

      In my misspent youth, I spent a couple summers wiring houses and an old
      electrician once told me, that if a house had a well designed electrical
      system, THEORETICALLY, the neutral would carry little, if any load. You
      could, once again in theory, snip the neutral and all the 120 loads would
      find themselves in series across the 240. The 1500 watt waffle iron on L1
      would be in series with the 1500 watt coffee maker on L2. The 240 v electric
      hot water heater would be a wash.

      Hello Larry

      I think that's wrong maybe not in the example you give but in practical use
    wouldn't work. If either apliance were turned off there would be no circuit.
    And if more than one apliance were on the same leg there would not be enough
    voltage to share on a series circuit. In a typical series circuit voltage is
    divided in other words if you were to conect two 120V light bulbs in series
    across a 240V circuit all is fine. But if you were to conect three the bulbs
    would be dim because each bulb is only recieving 80V.

      Brian Palmetto FL
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe send email to
     with the word
    UNSUBSCRIBE and nothing else in the subject or body of the message.

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: Pascal Gademer: "Re: T&T: 30 amp service vs. 50 amp service"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |