Next message: Terry: "T&T: Racor 2 micron vrs 10 micron"
I have a Xantrex Prosine 2.5 Inverter installed on my boat with the
standard remote panel that comes with the unit. The panel has stopped
functioning. I have call their support center and the only help they
could provide was either the panel is broken or the inverter unit is
broken and they both are not repairable. The display panel will only
flash standby in charge or invert. Yet when AC power is applied to the
inverter it passes the AC through and starts charging the batteries at
14.2 VDC and after a while goes to float mode voltage of about 13.2 VDC
but the AC in LED on the panel will not light nor can you get the unit to
go into inverter mode.
The remote panel passes all of its self tests and I asked if I sent in
the panel if they could test it on one of their working units. I was
told there is no testing available nor do they repair this $2K unit.
Xantrex suggested I find some one with a Prosine 2.5 or 3.0 unit and ask
them to plug my panel into t5he second port on the inverter to test my
display. If the display works then the inverter is defective and it
cannot be repaired and will need to be replaced.
If any one is thinking about an inverter from Xantrex I suggest that you
ask if it is a repairable unit or a through away.
Is there anyone on the site who has a Prosine 2.5 or 3.0 unit willing to
test my control panel? If so please contact me directly at
SHARKBYTE2 at JUNO>COM
Regards, Rick Blake
"Private Reserve" Port Charlotte, Fl.
36' Nantucket Sedan Powered by Yanmar
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
