Next message: Sylvain Sirois: "T&T: Battery isolators"
From inside the Boat, is there a large plastic "nut" holding the
Transducer in place? Just loosen this a few turns and pull up on the
handle, not the wire!
On May 3, 2006, at 4:11 AM, John Gallagher wrote:
> .I have tried twisting and pulling my knot meter paddel wheel to get
> it out but
> doesn't want to budge. Any suggestions ???
>
> John
>
>
>> Most paddle wheel units can be loosened, raised slightly, then turned
>> 180 degrees for a few moments while underway. This reverses the
>> paddles an usually cleans them off. Just return the 180 and snug
>> down.
>> YMMV but works for me!
>> MARCY
>> Kha Shing 36
> _______________________________________________
> http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
>
> To unsubscribe send email to
> with the word
> UNSUBSCRIBE and nothing else in the subject or body of the message.
>
> Trawlers & Trawlering and T&T are trademarks of Water World
> Productions. Unauthorized use is prohibited.
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
