| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

Re: T&T: Boot Stripe

From: Keith (no email)
Date: Mon May 01 2006 - 09:46:44 EDT

  • Next message: Ron Rogers: "Re: T&T: Boot Stripe"

    I had mine done with Imron, since it's a bit softer and easier to repair
    than harder paints. 3+ years it looks like new. This was painted on
    fiberglass though, not over AwlGrip. I'd check to be sure you could use it
    over the paint.

    Keith
    _____
    Going to church doesn't make you a Christian any more that going to a garage
    make you a mechanic.
    ----- Original Message -----
    From: <>

    >
    > The entire boat has been awl-gripped, but I still need to do the boot
    > stripe.
    >
    > I'm thinking that given its at the water line and is often scrubbed, I
    > should
    > also use a 2 part poly, even tho a single part would be a lil easier (and
    > thicker application per coat)
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe send email to
     with the word
    UNSUBSCRIBE and nothing else in the subject or body of the message.

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: Ron Rogers: "Re: T&T: Boot Stripe"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |