|
|
|
|
|||||
|
||||||
From: Bob Austin (no email)
Date: Thu Dec 01 2005 - 19:04:24 EST
Actually I do have a small compressor which will drive impact wrenches--which
I also use. Where to keep? Big boats, with lots of storage--plus I was able
to keep most of my tools in the engine room/or work shop--depending on the
boat.
In my case I did not carry a chop saw--and saw no reason for one. I used the
router when I had to remake teak gratings--damaged on the Atlantic crossing.
Also when I remade chart table shelves--more shelves as I got more charts.
The ability for a clean cut, the piercing ability of the Rotozip is what makes
it desirable.
Belt sander--when I had to replace teak planks in the deck--but did not sand
the deck--just getting right thickness of planks--same for grating.
Bob Austin
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
|