Next message: Mike Maurice: "T&T: MINN KOTA FISHERMAN'S TEMP SENSOR"
The Pee thru the small hose (about 1/4" diameter" ) is what I have used for
over 30 years on siphon breakers--just drill a small hole in the hull and
epoxy in a hose barb of the correct size above the water line. An adaptor is
placed where the siphon breaker vent was (which often would be cloged with
salt and of no value. On the Force 50 it was right by the galley window so
you could be sure that there was good water flow when you started the genset.
Bob Austin
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To unsubscribe send email to
with the word
UNSUBSCRIBE and nothing else in the subject or body of the message.
Trawlers & Trawlering and T&T are trademarks of Water World
Productions. Unauthorized use is prohibited.
