| Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch |

Re: T&T: Strong Anchor Swivel

From: (no name) (no email)
Date: Sun May 29 2005 - 16:36:23 EDT

  • Next message: Dave Daigle: "T&T: Archive searching"

    Ron,

    Bosun is dangerously wrong; another example of distributor inattention to a
    simple detail that can wreak havoc with the consumer. Since Suncor's web page
    has an ominous agreement prior to admitting one to their information, I will
    not quote them; anyone can check it out. Suffice it to say that the number Bosun
    lists as the WLL is not reality. Check it out.

    Insofar as electrolysis with SS & galv. combinations, there are many, like
    myself, who are not prevented from experiencing it by well-meaning town fathers.
     In winter, in the Windwards, I anchor some places for weeks at a time, and
    only enter a marina twice: for a week following launch, and one prior to haul.
    Electrolysis does occur! However, the real solution here is not how to
    prevent problems with dissimilar anchoring hardware. It is to do what has always
    been done: don't mix 'em. Too bad they don't make aluminum chain and swivels to
    go with your Spade! <VBG>

    Best,

    John

    In a message dated 5/29/05 1:50:19 PM Eastern Daylight Time,
     writes:

    >
    > Let me clarify. My ACCO SL 3/8" chain (read BBB high tensile) has a working
    > load in the 5000+ pound range. Bosun lists the *new* Suncor product as
    > S0190-X013 15000 pounds (WLL). Thus, we can see that no matter what the
    > exaggeration, this one is adequate to my needs.
    >
    > The concern of electrolysis is a real one, however, and has been brought up
    > on another list. Again, let's apply the standard of reasonableness, this is
    > not a mooring line, it is an anchoring system. If I were to remain at anchor
    >
    > in a town (!that permitted it!) for a length of time, I might substitute the
    >
    > much weaker ACCO galvanized swivel in hopes that a hurricane would not hit.
    >
    > Lastly, my working anchor is a 33 pound aluminum Spade. Therefore, for
    > extended anchoring, my 75 pound SS Northill is the answer. I wonder if we
    > will now discuss zincs for anchor chains or pouring vinegar on anchor
    > chains.
    >
    > Ron Rogers
    > 1985 Willard 40
    > AIRBORNE
    >
    >

    "Do what you can, with what you have, where you are."
    Theodore Roosevelt
    _______________________________________________
    http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

    To unsubscribe send email to
     with the word
    UNSUBSCRIBE and nothing else in the subject or body of the message.

    Trawlers & Trawlering and T&T are trademarks of Water World
    Productions. Unauthorized use is prohibited.


  • Next message: Dave Daigle: "T&T: Archive searching"



    | Home | Mailing Lists | Bookstore | Weather | Tide Predictions | Bowditch | Trawlerworld |