Next message: Kim Boyce and Eric Thoman: "RE: T&T: Re: Drilling through glass"
-Ted,
Glad to hear that things are fixed.
I think I need to interject something here though. If this has been the
problem with all the others, I'd want to know why. Is there vibration that
is causing the screws and connectors to shake loose? If so plan for that by
securing the connections a bit better than the normal process. Maybe some
LocTight on the mounting screws? At least make sure that there are lock
washers there.
May be worth making a semi permanent crimp connection instead of a slip-on
spade type if that's what there now.
Whatever, try to improve on its reliability or you'll be back down there
again at the most inopportune time.
Good luck,
Bill
> The problem has been resolved.My thanks to all those who offered advice.
> Here is what we found
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To Unsubscribe send email to
Include the word Unsubscribe (and nothing else) in the subject or body of the message.
