|
|
|
|
|||||
|
||||||
From: Glenn Williams (no email)
Date: Wed Sep 08 2004 - 19:50:47 EDT
-----Original Message-----
From:
[mailto:] On Behalf Of
Sent: Thursday, 9 September 2004 12:39 AM
To:
Subject: T&T: Bilge Pump
This unit will sometimes (perhaps on a monthly interval) cycle
continuously without discharging water. The solution has been to manually
depress the
float valve for a few seconds and then allow it to re-engage. And yes, the
unit
it cleaned on a regular basis.
The question is might the unit be corrected, or should it be replaced with
something such as an Ultraswitch (and if the latter, the best place to
acquire
that which you would recommend).
Rick
Hi Rick I have had this problem from time to time and the problem is
cavitation, IMHO.
I don't think a different switch will help, and I don't know what the answer
is either. But you're right, switch it off then on and the problem goes
away.
Cheers
Glenn.
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
To Unsubscribe send email to
Include the word Unsubscribe (and nothing else) in the subject or body of the message.
|