Next message: (no name): "TWL: Barient Model 27 2-speed Self Tailing Winch (fixed jaw)"
Here's what we applied after peeling and drying my hull:
3 sessions of 1.5 oz. fiberglass mat with vinylester resin
2 coats Interprotect 1000 - High build epoxy primer
2 coats Interprotect 2000 - 2 part epoxy barrier coat
1 heavy sweep Interprotect VC tar2 - Watertight 2 part epoxy putty
3 coats Interprotect 2000 - 2 part epoxy barrier coat
2 coats antifouling - Petit Trinidad SR (4 gallons).
It's too soon to tell you how this is working, but I have faith that it will
last a LONG time. Only been back in the water about 5 months so far. This
work was done in Texas, with cruising in warm waters in mind.
Keith
__
A conscience is what hurts when all your other parts feel so good!
----- Original Message -----
From: "Philip J. Rosch" <>
>
> My question is what is the best and worst barrier coat product from a
> cruiser's perspective?
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawler-world-list
To Unsubscribe send email to
Include the word "Unsubscribe" (and nothing else) in the subject or body of the message.
