![]() |
|
|||||
|
||||||
From: Bill Cooke (no email)
Date: Wed Jul 02 2003 - 09:28:13 EDT
Mel,
If what you want to do is monitor your exhaust elbow temp., I built one for
about $15.00.
I used a Therm-o-disc from Grangers. Cost about $9. Clamped it to the
exhaust elbow with a large hose clamp, $4. Wired it in parallel to the low
oil pressure alarm. $2 for wire and ties??
If you lose raw water you can bet that the exhaust elbow will heat up
quickly, close the Therm-o-disc and set off the alarm. If alarm sounds and
the gage says oil pressure is OK then it must be the elbow over heating.
Let me know if you have questions.
Bill
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawler-world-list
To Unsubscribe send email to
Include the word "Unsubscribe" (and nothing else) in the subject or body of the message.
|