|
|
|
|
|||||
|
||||||
Subject: TWL: Re: To experienced woodworkers: HELP!
From: Ron Rogers (rcrogers6@XXX.XXX)
Date: Sun Feb 02 2003 - 12:47:35 EST
The 3 piece set offered by Sears will only tear up bronze or any other
"soft" screw. These bits work well on hard drywall screws and similar.
Haven't tried them on Type 304 or 316 stainless. I have gotten the old style
drill and reverse screw extractors to work on bronze. However, if any screw,
especially "bronze" has been power-driven into fiberglass, it is likely that
the fiberglass melted and reformed around the screw. This is what happened
to me on my Dyer 29 toerail. Only every third screw came out and the rest
broke-off.
Ron Rogers
----- Original Message -----
From: "Dan Stone" <stonejd@XXX.XXX>
> I remember seeing on TV some screwdriver bits advertised which seemed to
> have sharp edges with points to dig in and hold for removing difficult
> screws (? a Bob Villa special). Anyone familiar with these?
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawler-world-list
To Unsubscribe send email to trawler-world-list-request@XXX.XXX
Include the word "Unsubscribe" (and nothing else) in the subject or body of the message.
|