|
|
|
|
|||||
|
||||||
Subject: TWL: Re: Gulf Coast Filter
From: Andy Woods (awoods@XXX.XXX)
Date: Mon Dec 02 2002 - 17:29:07 EST
> Can anyone tell me the total clearance required to install a GCF-F1. I
have
> 35" clearance where I want to install a fuel polishing system but I'm not
Mike,
Go to www.fuelpolishing.com and you should be able to find the information
you need. I think the F-1 will require 33" of vertical space to install the
housing and allow for changing the element. Belgoes Filtration Systems
fabricated a tilt mechanism for me that reduced that dimension. I have 9"
of clearance above the top of the F-1 housing. I drain the fuel out of the
housing, tilt the whole thing forward, and pull the element out of the top.
Without the tilt mechanism I would have had to use a different filter or
mount the F-1 under a floor hatch.
Regards,
Andy
Usual disclaimers, just a happy customer!
Andy & Linda Woods
Grand Folly
1970 Grand Banks 36 Classic
Georgetown, MD
awoods@XXX.XXX
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawler-world-list
|