|
|
|
|
|||||
|
||||||
Subject: Re: welding cable (was Re: TWL: Bowthruster question)
From: Andrew Woods (ajwoods@XXX.XXX)
Date: Sun Apr 01 2001 - 08:39:22 EDT
>It's also
> important to do a good job connecting the end fitting.
Check with your local battery warehouse. I used the one that distributes
Interstate Batteries. Look in the yellow pages as most will advertise custom
cables. They can make battery cables for you. They will need to know the
length and what kind of terminals you will need. Do a good job of lay out
and make a drawing. They will want all of the details possible such as
exactly where the positive and negative posts are and which way the cable
leaves the battery (if you are connecting to a battery). They should be
able to provide red and black cables, swaged fittings, heat shrink, ect. If
not, find someone else. Re-read Louis Brydon's post as installation is
important. They will use welding cable.
Regards,
Andy
Andy & Linda Woods
Grand Folly
1970 Grand Banks 36 Classic
Georgetown, MD.
ajwoods@XXX.XXX
|