|
|
From: George Huxtable (no email)
Date: Sun Jun 20 2004 - 05:19:09 EDT
Brooke Clarke wrote-
>Most compasses that use a pin pivot are made to
>work in some band of latitudes by adding a weight to one end of the
>pointer so it will rest about level at the center of the latitude band.
>There's a patent on the idea of having the magnetic part of the needle
>on a hinge so it actually points along the magnetic vector and the
>needle stays level, good for any latitude.
Response from George.
I have some doubts about how useful that would be.
It can't really be "good for any latitude", can it? Above a magnetic pole,
where the field points vertically, there's simply no way to extract a
Northerly direction from a compass, whether or not the magnetic part of the
needle is free to pivot about a horizontal axis: that magnet will simply
point straight up and down.
At a location away from the magnetic pole, but near it, will the turning
moment on the needle assembly, trying to draw it into the North-South
direction, be affected by allowing the magnet to tilt freely to align
itself with the steep tilt of the field? My guess is that it will be
considerably reduced, but I am not sure I have got the 3-dimensional vector
diagram right. Confirmation or refutation would be equally welcome.
Brooke Clarke tells us that a patent exists on the idea, but I haven't seen
any compass on the market that works on that basis: perhaps we can draw our
own conclusions.
One of the virtues of the old dry-card compasses (Kelvin type) that used to
be so common on big ships, was that it was easy to take off the glass top
and rebalance the card by shifting a weight, as the latitude changed.
It's certainly true that tilt of the card due to unbalance can lead to
errors in reading it, especially if the gimballing is not perfectly free to
move, because of parallax effects between the card and the lubber-lines.
George.
================================================================
contact George Huxtable by email at , by phone at
01865 820222 (from outside UK, +44 1865 820222), or by mail at 1 Sandy
Lane, Southmoor, Abingdon, Oxon OX13 5HX, UK.
================================================================
|