Re: latitude and longitude with Yeoman Chart Plotter
Subject: Re: latitude and longitude with Yeoman Chart Plotter
From: Brian Whatcott (betwys@XXX.XXX)
Date: Fri Jul 12 2002 - 07:43:27 EDT
At 05:48 AM 7/12/02, you wrote:
>Hello
>
>I have the following problem:
>I cannot referencing the chart.
>
>If I enter three positions with latitude and longitude I get reference error.
>But if I reference a chart with two points then it works
>
>Anybody can help me
>Best Regards
>Arne
Here's a wild guess: two points have a completely determined line to draw
between them.
Three points provide an uncertain input for a line of position: there are
three linesany
of which could represent the start point and the end point - so the plotter
rejects them??
Brian Whatcott
Altus OK Eureka!
