![]() |
|
|||||
|
||||||
From: (no name) (no email)
Date: Mon Jul 31 2006 - 14:25:58 EDT
>
> For the OP with the outboard, do you have a small in-line fuel filter?
> Perhaps you could cut one in, and change it every couple of months until
> your tank and system get 'cleaned out'. A simple on-line one, from an auto
> store would be cheap, and much easier then pulling the carb apart all the
> time.
There are probably new people on the list who haven't hear my rant before, so
I'll repeat. Any outboard should have a small inline filter. Just the
standard clear auto one will do. Put it inside the cover before the fuel pump. You
may end up going years without changing it, you might change it every day or
two occasionally, depending on the gas you get. Turst me, I know these things.
Also, get extra cotter pins and shear pins. If your outboard uses those
plastic things to hold the prop on like my little evinrude, get a spare of that as
well. Take off the cover of your outboard, find a place inside that has some
space between the cover and motor. Clean that spot. Line up these pins and
things, then take a caulking gun and glue them in with silicone. One of these
days you'll need one and it'll be right there. Again, I know these things!
One other thing. If you're heading out of the US, take plenty of those things
with you. You won't find them in other countries. At least none of the 6
countries I tried to find them in.
Gene Gruender
___________________________________________________________________________
|| The Live-Aboard List : send a "subscribe" or "unsubscribe" request ||
|| in body of message to: ||
|