Next message: Jeff Barfett: "RE: lv-ab: Looking for a lock"
A 3/4" piece of 3/8" rubber or Vinyl hose endwise to the stay, with a
tiewrap fed through it both ways, looping around stay on one end and high
voltage wire on the other end. (0=0) This will do the section below
the insulator, if you need standoffs inside, you could screw a tiewrap down,
then insert a piece of hose between it and the wire, then tighten it in
place.
Lee Haefele
----- Original Message -----
From: "lavida" <>
To: "'Lee Haefele'" <>; <>
Sent: Tuesday, June 13, 2006 8:55 AM
Subject: Antenna standoffs
> I'm looking for ideas for standoffs for my SSB antenna connection from
> the tuner to the insulated backstay.
>
> Thanks in advance,
> mike
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
>
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.3/362 - Release Date: 6/12/2006
___________________________________________________________________________
|| The Live-Aboard List : send a "subscribe" or "unsubscribe" request ||
|| in body of message to: ||
