![]() |
|
|||||
|
||||||
From: Hank Janssen (no email)
Date: Fri Dec 10 2004 - 11:57:31 EST
I actually installed the Dual racor filter on Osprey about 2 weeks ago. (I
had it sitting in the box for over 1 1/2 years and never installed it) I
do not recall exactly how much I paid for it, but I got a very good deal
on it. Around 500,- I believe.
Installation was a breeze. I had some issues with the hose connectors on
the filter housing. It does not come with any hose fittings, you have to
get them yourself. And the ones I got where of course the wrong size. (Get
non Racor ones, the Racor ones are damn expensive)
It has a 4 way switch on it. Left On, Right On, Both On, Both Off.
The unit is very well made. And very easy to maintain. I also installed a
manual primer pump to back up my electric primer pump.
The whole install took me probably 3 hours from start to finish. Most time
spend balancing the unit into the right position. It is kind of a tight
squeeze getting everyting in sometimes.
I can scan the install drawings and post them if there is an interest.
Hank.
> Back in time, think it was here, someone offered a drawing and parts list
> for a dual system racor. It was in a .jpg or .gif. file.
> Gave all part numbers and specs, along with configuration options.
> I searched and couldn't find it, anyone know where it might be?
>
> thanks,
> mike
> lavida
> ----- Original Message -----
> From: "Bob Clinkenbeard" <>
> To: <>
> Sent: Friday, December 10, 2004 8:45 AM
> Subject: Re: lv-ab: Racors/was Test
>
>
>> The parts store at Boat Diesel is closed....they are re-evaluating.
>>
>> You can find the dual setups on ebay from time to time. One company
>> sells
>> rebuilt units and sometimes go at fair prices, although the marine
>> models
>> are rare. A while back a 75/500 non marine went for $225. Marine has
>> the
>> metal cover on the bottom.
>> http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7935077202&category=33660
>> Check out his other auctions for new listings.
>>
>> I will probably build my own setup because of the cost of the dual units
>> although I believe they use a 3 position valve where I may have to use
>> two. I wonder if the valve itself is available...
>>
>> Any ideas?
>>
>>
>> Bob Clinkenbeard
>> Custom 41' Trawler
>> "Bobbin Along"
>> http://www.dreamwater.org/captainbob/
>> ___________________________________________________________________________
>> || The Live-Aboard List : send a "subscribe" or "unsubscribe" request
>> ||
>> || in body of message to:
>> ||
>>
>
> ___________________________________________________________________________
> || The Live-Aboard List : send a "subscribe" or "unsubscribe" request
> ||
> || in body of message to:
> ||
>
___________________________________________________________________________
|| The Live-Aboard List : send a "subscribe" or "unsubscribe" request ||
|| in body of message to: ||
|