Next message: Gary Prebble: "lv-ab: Interior Finish"
We have a design on the boards and a prototype built of a bilge pump
turn-off delay.
It is a little block of epoxy with two leads coming out that you connect
across the float switch.
It continues to run the bilge pump for 60 seconds after the float switch
turns off.
It draws no power from the battery.
We haven't gone into production because we were concerned that it would be
too expensive.
It would retail for about $55 - perhaps $45 on discount.
POLL: would you spend that much for such an item?
Please respond by email to so we don't clutter the board.
I'll publish the results later if anyone is interested.
Andina Foster,
> Has anyone got a good suggestion for a bilge pump style that will suck
out
> all the water instead leaving an inch or more water in the bilge when the
> "float" switch shuts off.
>
>
> Regards
>
> Arild
>
___________________________________________________________________________
|| The Live-Aboard List : send a "subscribe" or "unsubscribe" request ||
|| in body of message to: ||
